To us, quality means our customers can forget about us

Quality to us means not only perfect technology and reliable and durable products, but also the best possible service. in all phases.

During the planning stage, we listen carefully and ask pertinent questions to present the customer with the best possible solution in the shortest time-frame and with the least effort on the customer's part. Our Swiss reliability ensures that everything will be carried out to your utmost satisfaction. Deadlines and costs will be adhered to, while the effects on your operations until handover of the plant will remain minimal.

Once a plant has been installed and the technical staff instructed by our engineers, our customers rarely need our support. You will have the same experience. However, should you need our help, for instance, for longer maintenance, upgrading with new components. or advice on plant modernization, we will of course be at your service.

Electrostatic Precipitators

Electrostatic precipitators with their countless areas of application remain the most economical system for the removal of dust horn industrial gases. Operating costs are reduced due to low energy consumption, and the cost of maintenance and spare pads is very low. In addition, the life expectancy of an electrostatic precipitator usually exceeds that of the upstream production units, such as kilns, mills, driers and coolers.

ADITYA ENTERPRISES electrostatic precipitators are capable of reducing dust content of more than 1,000 g/m3 to any required residual dust content. More than 6,000 units installed worldwide since 2008 are proof of their efficiency and durability. The continuous and further development of all precipitator components using the most advanced technologies and the analysis and evaluation of measured results under various operating conditions have provided an immense pool of experience. When choosing on an ADITYA ENTERPRISES installation, customers benefit from unrivalled know-how.

The typical applications for electrostatic precipitators are:

• Production plants for cement, limestone and gypsum (kilns, mills, dryers and coolers)
• Coal- and biomass-fired steam boilers
• Refuse and sludge incinerators
• Iron and steel production (ore processing, blast furnaces, converters)
• Production plants in the non-ferrous metal industry
• Production plants in the pulp and paper industry

Safety and trouble-free operation thanks to the best electrical component

A chain is as strong as its weakest link. In order to do justice to the high demands ADITYA ENTERPRISES makes on its installations, we only use quality components. Our precise knowledge of optimal sizing ensures that costs remain stable.

The most important electro-technical components:

Microprocessor-controlled high-voltage rectifier
Control cabinet with automatic voltage control and thyristor with current-limiting reactor for:
Accurate recording of signal values, i.e. rapid and refined diagnosis of sparks and arcs
Control of signal values such that optimal suitability of the power supply
to the continually changing electrical demands is guaranteed
Modulation of one or several half-waves for the purpose of high dust
resistance and/or saving energy
Easy-to-understand failure diagnosis
Simple adaptation to new operating conditions

Hand-operated HT-disconnecting switches and, for certain applications, electro-magnetically or pneumatically operated fast-response earth switches (These components can be located with the high-voltage equipment in the HV room or on the roof of the precipitator)

Low-voltage switch-gear cabinet for the auxiliary equipment (e.g. rapping mechanisms, Insulators, and hopper heating and dust-conveying equipment).

Individually controllable controls (so-called SPS) ensure an efficient connection to the microprocessor-controlled high-voltage equipment.

1. Dust Collection Hopper                      2. Gas inlet with Gas Distribution
3. Discharge Electrode Rapping         4. Discharge Electrode
5. Collecting Electrode                           6. Collecting Electrode Rapping

High Efficiency Centrifugal Fans

Aditya Enterprises is technologically & principally committed to pollution control to minimize environmental hazards. People are need to tackle after affects of industrial pollution with the need voluntarily addressed in international standards like ISO 14000. This still is insufficient as pollution control has been vieweasa dead investment eating away the profit margins & its returns in terms of reduced absenteeism & higher productivity are grossly overlooked.

More & More customers are availing of ISO 1400 & coaxing their supplies to adopt the same to fulfill their social responsibility. It is a matter of time after which this standard will be a mandatory part of the industry.

Pollution control is an customized affair which involves feability study, problem analysis & sturdy system with minimum requirement of maintenance. This calls for experienced engineers & resources to ensure smooth custom designed solutions right from fabrication, installation & commissioning. We at Aditya Enterprises offer you a single source to nullify your environmental pollution woes.

MAJOR EFFECTS OF POLLUTION

Deposition of solid particles, grit & coares dust Fall relatively close to the chimney whilst fine dust and smoke are more widely dispersed. Deposition of tarry liquids and tarry smoke.

Blackening of buildings and clothes by smoke & soot E.G. Taj Mahal Health problems like cancer, silicosis, filorosis due to inhalation of harmful gases. damage to plants, particulars matter, animals & crops.

SAG FILTER

It is available in multitude of types, they are selected on basis of application but are generally used to segregate smoke & dust particles resulting in air filtration.

VENTURI & CAGES

Sam action lock (Snap Type). Unique design to facilitate quick removal of bags from top cleam in pentium. Available in various materials of construction.

SOLENOID VALVE

Solddiaphragm Solenoid valve Assembly.

Compact and reliable design eliminating flexible tube and reducing maintenance costs. Available in family proof enclosures also.

SIMPLE SAG REPLACEMENT

SEQUENCE TIMER

Solid state timer compatible to ADITYA 4 / IP 55 codes with adjustable pulse duration and interval. Suitable for 110V / 230V AC. Available in flame proof enclosures also.

ROTARY AIRLOCK

Consists of a cylindrical housing advanced rotor and a drive. Rotor fits snugly into the housing, minimizing gas leakage while effectively discharging the material. Available in various mate als of construction.

Multi Cone Fly Ash Collector

Introduction : Coal/Bagger husk fired boilers have maximum ash flying in operation. Fly ash being light weight appears at chimney discharge in considerable quantity, this airborne gets carried away and settles down over a large area and is a dangerous hazard to residents nearby and covering miles together. Aditya Enterprises latest design with efficiency fly ash collectors introduced after considerable chimney. Its function is to remove fly ash from flue gases and allow cleaner discharge to be omitted from chimney, complete surrounding of factory.

Multi Cone Fly Ash Collector

TESTING FACILITY

Performance test as per different standards namely IS-4894, BS-848, AMCA-210 can be done. Fan sound and vibration can also be measured at Aditya Enterprises workshop or at site depending on suitability.

CUSTOMER TO SPECIFY ORIENTATION DURING ORDER PLACEMENT

APPLICATION OF CYCLOPACS :

• Sugar Factories      • Steam Boilers
• Paper Mills                • Wood & Paper Board
• Steel Mills                  • Drying Kilns

HOW TO ORDER OF PULSE JET SAG FILTER

Type of application.
Temperature of gas to be cleaned.
Purpose of installation (Reclamation pollution control etc)
Mat hod of dust disposal.
Type of dust to be handles.
Dust content of gas and particle analysis.
Physical restriction of space, location etc.
Hopper capacity and storage time.